Filter
Top Products
TEMPERATURETOO HIGH The camcorder hasexceeded its operational temperature, Turn off the
CANNOTPLAYBACK camcorder and let it cool down before resuming use.
CANNOTDIVIDETHE SCENE Youmay not be able to divide very short scenes.
Scenes cannot be divided when the disc already contains B99 scenes.
Youmay not be able to further divide scenes shorter than 5 seconds that were
created by dividing a previous scene.
The dual-layered disc you inserted cannot be used with this camcorder. 7PLEASEUSEONLYTHE
RECOMMENDEDDISCS
DISCIS FINALIZED CANNOT
RECORD
UNFINALIZETHE DISC
DISCIS PROTECTED
CANNOTREAD THEDISC
CHECKTHE DISC
• ACCESS ERROR
• DISCACCESS FAILURE
CHECKTHE DISC
DISCCOVERIS OPEN
DISCMUST BE FINALIZEDTO
PLAY BACKIN COMPATIBLE
PLAYERS
NO DISC
LOADINGTHE DISC
AVOIDMOVINGTHECAMCORDER
UNABLETO RECOVERDATA
Youcannot record additional scenes on a finalized DVD-R/DVD-R DL disc,
Youcannot record additional scenes or unfinalize a DVD-RW disc (HD quality,
or SB quality (VIDEOmode)) that was finalized using another digital device.
Youcannot record additional scenes on a finalized DVD-RW disc (HDquality, or
SB quality (VIDEOmode)). Unfinalize the disc first.
The disc is protected. Replace the disc or remove the disc protection.
Disc could not be read. Try cleaning it or replace the disc.
This message can also appear if condensation hasformed. Wait until the
camcorder dries completely before resuming use.
This message can also appear if the camcorder has exceeded its operational
temperature. Turn off the camcorder and let it cool down before resuming use.
The disc may not be loaded correctly. Try removing the disc and reinserting it.
There was an error when reading the disc or attempting to write onto it. Try
cleaning the disc or replace it.
This message can also appear if condensation hasformed. Wait until the
camcorder dries completely before resuming use.
The disc may not be loaded correctly. Try removing the disc and reinserting it.
Close the disc cover.
Besure to finalize the disc and check the compatibility of the device before
playing back the disc on external DVD devices.
No disc is loaded. Insert adisc.
This message can also appear if condensation hasformed. Wait until the
camcorder dries completely before resuming use.
The disc is being read. Wait before you start recording.
Try notto move the camcorder while the image is being recorded.
Could not recover a corrupted file.
This message can also appear if condensation hasformed. If you suspect
condensation isthe reason, do not initialize the disc and wait until the
camcorder dries completely before resuming use.
66
111
114
32
111
114
32
68
32
114
114
107