Filter
Top Products
Vd÷o
Mode switch: P Mode switch: P
1 If the joystick guide does not
appear on screen, press ((_)) to
display it.
2 Push the joystick (A) toward
[FOCUS].
• If [FOCUS] does not appear on the
joystick guide, repeatedly push the
joystick (Y) toward [NEXT] to
display it.
• "MF" appears.
3 Push the joystick (_l_- } once to
verify if the image is focused.
The center of the screen will be
magnified to help you focus more
easily. You can also turn off the focus
assist function (L3348).
4 Keep the joystick pressed down
(4_) to adjust the focus as
necessary.
Pushing the joystick (A) toward
[FOCUS] again will return the
camcorder to autofocus.
Infinity Focus
Use this function when you wish to
focus on faraway subjects such as
mountains or fireworks.
Adjust the zoom before you start the
procedure.
1 If the joystick guide does not
appear on screen, press (Q) to
display it.
2 Keep the joystick pushed (A)
toward [FOCUS] for more than 2
seconds.
• co appears.
• Pushing the joystick (A) toward
[FOCUS] again will return the
camcorder to autofocus.
• If you operate the zoom or the
joystick (4_), co changes to
"MF" and the camcorder returns to
manual focusing mode.
ManualExposureAdjustment
At times, backlit subjects may appear
too dark (underexposed) or subjects
under very strong lights may appear too
bright or glaring (overexposed). To
correct this, you can manually adjust
the exposure.
_ POINTSTOOH£OK
I
Mode switch: P (except for the
[DFIREWORKS] recording program).
6O