Filter
Top Products
Configure Motion and Sensor Settings
70
Recording Schedule dialog - Motion and Sensor Settings
In the Add/Edit Recording Schedule dialog, there are two options available for setting
recording parameters. To enable recording options and adjust settings:
Tick one or both boxes and click the Settings... button
Tick each box to enable the functions.
Default settings are then enabled.
Click Settings... to change the default
settings for each option.
c
The motion detection settings are dependent on the quality
settings of the Camera Server. When setting motion detection
parameters, it should be ensured that the quality setting of the
Camera Server is the same as the quality setting that will be in
place at the time that the schedule item applies. Refer to your VB
manual.
Note