OTHER RECORDING FUNCTIONS
142
Specifying ISO Sensitivity
You can change the ISO sensitivity setting for better
images in places where lighting is dim or when you are
using faster shutter speeds.
• ISO sensitivity is expressed in terms of values that
originally indicated the sensitivity to light for photographic
film. A larger value indicates higher sensitivity, which is
better for recording when available lighting is dim.
1.
In a REC mode, press [MENU].
2.
Select the “Quality” tab, select “ISO”, and
then press [̈].
3.
Use [̆] and [̄] to select the setting you want
and then press [SET].
Select this setting:
Auto
ISO 50
ISO 100
ISO 200
ISO 400
To get this:
Automatic sensitivity selection
Lower sensitivity
Higher sensitivity
IMPORTANT!
• Note that BEST SHOT mode settings take priority
over mode memory settings. If you turn the camera
off while in the BEST SHOT mode, all settings
except for “Zoom Position” will be configured
according to the BEST SHOT sample scene when
you turn it back on again, regardless of mode
memory on/off settings.
• In the following modes, “ ” (Flash Off) is always
selected as the flash mode regardless of mode
memory on/off setting.
Movie mode, MOVIE BEST SHOT mode