Filter
Top Products
APPENDIX
272
One of the following problems occurred during
printing.
• Printer power off
• Printer internal error
Image compression could not be performed during
image data storage for some reason. Record the
image again.
The camera is in the Printer mode, and the printer
is running low on ink or is out of ink.
If the lens comes into contact with some obstacle,
this message appears and the camera turns off. Take
action to remove the obstacle, and try turning on
power again.
Your camera system is corrupted. Contact your
retailer or a CASIO service center.
The LOCK switch of the SD memory card is locked.
You cannot store images to or delete images from
a memory card that is locked.
• There are no files in built-in memory or on the
memory card.
• This message will appear if you rename the files
or folders in camera memory or if you move them
to different locations. If this happens, move the
files or folders back to their original locations in
camera memory and return them to their original
preset names (pages 235, 237).
Printing Error
Record Error
Replenish ink!
RETRY POWER ON
SYSTEM ERROR
The card is locked.
There are no files.
There are no printing
images.
Set up DPOF.
There is no image to
register.
This card is not
formatted.
This file cannot be
played.
This function cannot
be used.
This function is not
supported for this
file.
There are no DPOF settings specifying images
and the number of copies of each for printing.
Configure the required DPOF settings (page 211).
The image or movie whose setup you are trying to
save is not supported by BEST SHOT.
The memory card loaded in the camera is not
formatted. Format the memory card (page 206).
The image file or audio file is corrupted, or is a
type that cannot be displayed by this camera.
You attempted to copy files from built-in memory
to a memory card loaded in the camera while there
is no memory card in the camera (page 207).
The function you are trying to perform is not
supported for the file on which you are trying to
perform it.