Filter
Top Products
GETTING READY
41
■ Tips to Make the Battery Last Longer
• If you do not need the flash while recording, select
(flash off) for the flash mode. See page 67 for more
information.
• Enable the Auto Power Off and the Sleep features (page
47) to protect against wasting battery power when you
forget to turn off the camera.
• Use the “0” monitor screen brightness setting to consume
less power (page 199).
3.
Release the stopper and pull the battery from
the camera.
• Take care so you do not drop the battery.
4.
Load a new battery into the camera (page 35).
To replace the battery
1.
Open the battery cover.
2.
Pull the stopper in the direction indicated by
the arrow.
• This will cause the battery to come part way out of
the slot.
Stopper