Filter
Top Products
1-4
Cisco Video Surveillance 2600 IP Camera User Guide
OL-24127-02
Chapter 1 Overview
IP Camera Overview
Figure 1-2 and the table that follows describe the items on the rear of the IP camera.
Figure 1-2 Rear of IP Camera
5 Ready LED (amber) Indicates power state as follows:
• On—Power is on
• Off—No power
• Blinking—IP camera is starting up. The start up process takes 15 to
20 seconds.
If you check the Enable LED Operations check box in the Basic Setup
window, the Ready LED does not light. For more information see the
“Basic Setup Window” section on page 3-5.
1 Reset button Recessed button that reboots the IP camera or resets it to a default
state. You can use a pin or paper clip to depress it. It can be used
any time that the IP camera is on and can have various effects, as
described in the
“Resetting the IP Camera” section on page 2-8.
2 Network LED (amber) Indicates information about the network connections as follows:
• On—LAN connection is detected
• Off—LAN connection is not detected
• Blinking—Data is being transmitted or received via the LAN
connection
3 LAN port Accepts a standard LAN cable to connect the IP camera to a
10/100BASET hub, router, or switch.