Filter
Top Products
4-8
Cisco Video Surveillance 2600 IP Camera User Guide
OL-24127-02
Chapter 4 Viewing Live Video
Viewing Video through Third-Party Devices or Software
Accessing the MJPEG Stream
In the following commands, the ip_address argument represents the IP address of the IP camera. After
you enter the command, enter your IP camera user name and password when prompted.
• To access the MJPEG stream with video and audio, enter this command:
rtsp://ip_address/img/jpgmedia.sav
• To access the MJPEG stream with video only, enter this command:
rtsp://ip_address/img/jpgvideo.sav
Accessing Dual Streams (H.264 + MJPEG)
In the following commands, the ip_address argument represents the IP address of the IP camera. After
you enter the command, enter your IP camera user name and password when prompted.
Dual Stream (H.264 + MJPEG):
• To access the H.264 stream with video and audio, enter this command:
rtsp://ip_address/img/h264media.sav
• To access the H.264 stream with video only, enter this command:
rtsp://ip_address/img/h264video.sav
• To access the MJPEG stream with video and audio, enter this command:
rtsp://ip_address/img/jpgmedia.sav
• To access the MJPEG stream with video only, enter this command:
rtsp://ip_address/img/jpgvideo.sav
Accessing Dual Streams (MPEG-4 + MJPEG)
In the following commands, the ip_address argument represents the IP address of the IP camera. After
you enter the command, enter your IP camera user name and password when prompted.
• To access the MPEG-4 stream with video and audio, enter this command:
rtsp://ip_address/img/media.sav
• To access the MPEG-4 stream with video only, enter this command:
rtsp://ip_address/img/video.sav
• To access the MJPEG stream with video and audio, enter this command:
rtsp://ip_address/img/jpgmedia.sav
• To access the MJPEG stream with video only, enter this command:
rtsp://ip_address/img/jpgvideo.sav