Filter
Top Products
4-5
Cisco Video Surveillance 2600 IP Camera User Guide
OL-24127-02
Chapter 4 Viewing Live Video
Viewing Video through the Home Window Overview
Preset Camera
View drop-down
list
When you choose a preset position from this list, the camera immediately goes to
that preset position.
If the camera is executing a patrol sequence, choosing a preset position from this
list cancels the sequence.
This button appears only if you enabled external PTZ for the camera. For
information about enabling external PTZ and configuring preset positions, see the
“PTZ (RS-485) Window” section on page 3-35.
Patrol Sequence
button
Click this button to execute the sequence that is configured for this IP camera.
For information about configuring a sequence, see the “PTZ (RS-485) Window”
section on page 3-35.
Zoom Out button Use these buttons to control optical zooming.
The optical zoom function requires that the IP camera be installed with a
motorized zoom/focus lens in a pan/tilt mount that supports the Pelco D protocol
and that PTZ functions are enabled. For more information, see the
“PTZ (RS-485)
Window” section on page 3-35.
Zoom In button
IP camera control
buttons
To pan the IP camera, use the left or right arrow buttons.
To tilt the IP camera, use the up or down arrow buttons.
To move the IP camera to its home position, click the Move to Home button, which
is located in the middle of the group of arrow keys.
Pan and tilt functions require that the IP camera be installed with a pan/tilt mount
that supports the Pelco D protocol and that PTZ functions are enabled. For more
information, see the
“PTZ (RS-485) Window” section on page 3-35.
For information about configuring the home position, see the “Preset Positions
Window” section on page 3-36.
Focus far button Use these buttons to adjust the focus of the IP camera.
The focus function requires that the IP camera be installed with a motorized
zoom/focus lens in a pan/tilt mount that supports the Pelco D protocol and that
PTZ functions are enabled. For more information, see the
“PTZ (RS-485)
Window” section on page 3-35.
Focus Near button
Day button Improves video quality when the IP camera captures video in bright conditions.
This button appears only if you configure the Day/Night Vision Switch Mode to
Day or Night. For more information, see the
“Video Window” section on
page 3-16.
Table 4-1 Home Window Controls (continued)
Control Description