Filter
Top Products
3-45
Cisco Video Surveillance 2600 IP Camera User Guide
OL-24127-02
Chapter 3 Configuring and Managing the IP Camera
Status Windows
Stream: RTSP stream started. [ip: Type, UDP:
Address_1:Port_1 -> Address_2:Port_2, User]
Provides information when an RTSP stream from
the IP camera is initiated (RTSP stream started) or
stopped (RTSP stream stopped).
Type is the type of stream (Video or Audio).
Address_1:Port_1 are the IP address and port
number of the IP camera. Address_2:Port_2 are IP
address and port number of the device that
receives the stream. User is the IP camera user
name of the user who started or stopped the
stream.
Stream: RTSP stream stopped. [ip: Type, UDP:
Address_1:Port_1 -> Address_2:Port_2, User]
successful admin user login. A user with administrator privileges logged in to
the IP camera.
successful view only user login. A user with viewer privileges or monitor
privileges logged in to the IP camera.
System: Cancel upgrade process An IP camera administrator cancelled a firmware
upgrade that was in process.
System: Invalid upgrade file You are attempting to upgrade firmware for the IP
camera but are using and invalid firmware file.
System: Reset to factory defaults. Factory reset procedure performed for the IP
camera.
Unsuccessful login attempt. A user tried but was unable to log in to the IP
camera.
Web: Invalid login attempt. [id: User_ID, ip:
Address]
Provides information when someone logs in, or
attempts to log in, to the IP camera.
User is the IP camera user name of the user.
Address is the IP address of the PC that was used.
Web: User logged in to web UI. [id: User_ID, ip:
Address]
Web: User logged out from web UI. [id: User_ID,
ip: Address]
FTP log messages.
Note These messages appear if you enable the FTP Log option.
FTP: Error during the connection or timeout.
[host: Address]
Provide information when the camera uploads a
video file to the FTP server.
Address is the IP address of the FTP server.
FTP: File uploading failed. [host: Address]
FTP: File uploaded successfully. [host: Address]
FTP: Login failed. [host: Address]
FTP: No such remote path. [host: Address]
FTP: Unknown FTP server. [host: Address]
Table 3-26 Syslog and Log Information (continued)
Message Explanation