Filter
Top Products
4-7
Cisco Video Surveillance 2600 IP Camera User Guide
OL-24127-02
Chapter 4 Viewing Live Video
Viewing Video through Third-Party Devices or Software
Accessing the Primary H.264 Stream
In the following commands, the ip_address argument represents the IP address of the IP camera. After
you enter the command, enter your IP camera user name and password when prompted.
• To access the primary H.264 stream with video and audio, enter this command:
rtsp://ip_address/img/h264media.sav
• To access the primary H.264 stream with video only, enter this command:
rtsp://ip_address/img/h264video.sav
Accessing Secondary H.264 Stream
In the following commands, the ip_address argument represents the IP address of the IP camera. After
you enter the command, enter your IP camera user name and password when prompted.
• To access the secondary H.264 stream with video and audio, enter this command:
rtsp://ip_address/img/h264media2.sav
• To access the secondary H.264 stream with video only, enter this command:
rtsp://ip_address/img/h264video2.sav
Accessing the Primary MPEG-4 Stream
In the following commands, the ip_address argument represents the IP address of the IP camera. After
you enter the command, enter your IP camera user name and password when prompted.
• To access the primary MPEG-4 stream with video and audio, enter this command:
rtsp://ip_address/img/media.sav
• To access the primary MPEG-4 stream with video only, enter this command:
rtsp://ip_address/img/video.sav
Accessing Dual MPEG-4 Streams
In the following commands, the ip_address argument represents the IP address of the IP camera. After
you enter the command, enter your IP camera user name and password when prompted.
• To access the primary MPEG-4 stream with video and audio, enter this command:
rtsp://ip_address/img/media.sav
• To access the primary MPEG-4 stream with video only, enter this command:
rtsp://ip_address/img/video.sav
• To access the secondary MPEG-4 stream with video and audio, enter this command:
rtsp://ip_address/img/media2.sav
• To access the secondary MPEG-4 stream with video only, enter this command:
rtsp://ip_address/img/video2.sav