Filter
Top Products
- 100 -
Adding a fax forwarding setting
1
From the
Embedded Web Service
, select the
Settings
tab
Machine Settings
Fax
Send Foward
.
2
Enter the necessary information.
–
General
-
Send Foward
: Enable the send forward function.
- Attachment Format : Select the file format for the fax attachment.
–
Fax Forward To Email
- Default [From:] Address : Enter the sending person’s default address.
- Default Subject : Enter the default subject.
- Default Message : Enter the default message.
3
Forward List
Click on the
Add
button.
–
Fax Forward to
: Select the destination to forward the fax.
–
Address
: Enter the recipient’s address. You can load the address from the address
book by clicking the
Loading Address Book
. If you select FTP and SMB for the
destination, you can manually enter the information by clicking the
Direct Input
.
4
Click
Apply
.
Deleting a fax forwarding setting
1
From the
Embedded Web Service
, select the
Settings
tab
Machine Settings
Fax
Send Foward
.
2
Select the setting you want to delete and click
Delete
.
A pop-up window appears.
3
A confirmation message appears, click
OK
.
The list is reloaded and the setting you deleted is removed from the list.
Editing a fax forwarding setting
1
From the
Embedded Web Service
, select the
Settings
tab
Machine Settings
Fax
Send Foward
.
2
Select the setting you want to edit and click
Edit
.
A pop-up window appears.
3
Change the value as you want.
4
Click
Apply
.