Filter
Top Products
- 110 -
– Deleting the
SNMP
traps
a
From the
Embedded Web Service
, select the
Settings
tab
Network Settings
SNMP
SNMPv1/v2
SNMP Traps
.
b
Check the checkbox of the name(s) you want to delete from the list and click the
Delete button above the list.
c
A confirmation window appears. Click on
Yes
.
– Editing the
SNMP
traps
a
From the
Embedded Web Service
, select the
Settings
tab
Network Settings
SNMP
SNMPv1/v2
SNMP Traps
.
b
Check the checkbox of the name) you want to edit from the list and click the
Edit
button above the list.
c
Change the necessary information.
d
Click
Apply
.
SNMPv3
You can set SNMPv3 settings.
•
General
–
SNMPv3 Protocol
: Check to enable SNMPv3 protocol.
•
Authentication
–
User Name
: Check to enable SNMPv3 protocol.
–
Authentication Password
: Enter the password you want to use for
read-and-write authentication.
–
Confirm Password
: Re-enter the password for confirmation.
–
Authentication Algorithm
: Select authentication method.
•
Privacy
–
Privacy Password
: Enter the password used to encrypt SNMPv3
request/response.
–
Confirm Password
: Re-enter the Privacy Password for confirmation.
–
Privacy Algorithm
: Shows the algorithm used to encrypt the SNMPv3
request/response. Only DES algorithm is supported, you can not change it
manually.
SNMP/iPrint
•
SNMP/iPrint
–
SNMP/iPrint
: Select your operate system.