Filter
Top Products
- 150 -
Setting the paper feeding flow
1
Press
My Settings
Machine Setup
from the home screen.
2
Press the
Tray Behavior
.
3
Press the
Configure MPF
.
4
Press the left/right arrows to select the paper tray you are using.
•
Tray Mode
: When sending a print job from the computer, the printer uses paper in
the tray which you have already set in Printer properties. In this mode the MPF is
treated as another paper tray. Instead of treating MPF as first preference paper
source, printer pulls paper from the tray that matches the size and type. The first
preference goes to the default source.
•
Bypass Mode
: When sending a print job from the computer and the MPF is filled
with paper, the printer uses the paper in the MPF first. In this mode the printer
pulls the paper from MPF first unless it is closed or empty. MPF gets the highest
priority and pulls whatever media present in the MPF.
Bypass Mode
is set as a
default setting.
5
Press the home icon ( ) to return to Home Screen.
Setting the paper auto feeding
When the paper is mismatched, the machine waits for a while (about few seconds) and
starts printing automatically even if the paper mismatches.
1
Press
My Settings
Machine Setup
from the home screen.
2
Press the
Tray Behavior
.
3
Press the
Auto Continue
.
4
Press the left/right arrows to select the
On
you want to use.
5
Press the home icon ( ) to return to Home Screen.
Substitute Size
This setting is used to determine whether the printer can substitute with another paper size
when the requested paper size is not available in any of the input trays. The Printer will
substitute A4/Letter, A5/Statement, B5/ISO B5, and Folio/Oficio. For example if A4 is
requested paper size and there is no A4 paper in any of the input source then the printer will
print on Letter size paper, if available.
Substitute size set to
Off
means no substitution is allowed for the requested paper size. This
option is not applied for received fax printing.
NOTE: You can use this feature in print and copy job.
Configure MPF
MPF can be configured to behave in
Tray Mode
or in
Bypass Mode
by setting the
Configure
MPF
menu in the operator panel.