Dell B2375dnf Photo Scanner User Manual


 
- 135 -
Transparencies
Try a sample of any transparencies you are considering using with the printer before buying
large quantities:
Use transparencies designed specifically for laser printers. Transparencies must be able
to withstand temperatures of 180°C (356°F) without melting, discoloring, offsetting or
releasing hazardous emissions.
Avoid getting fingerprints on the transparencies, as this can cause poor print quality.
Before loading transparencies, fan the stack to prevent the sheets from sticking
together.
Load one transparency at a time into the MPF.
Selecting Transparencies
The printer can print directly on transparencies which have been designed for use in laser
printers. Print quality and durability depends on the transparency used. Always print samples
on the transparencies you are considering before buying large quantities.
Check with the manufacturer or vendor to determine whether your transparencies are
compatible with laser printers that heat transparencies to 180°C (356°F). Use only
transparencies that are able to withstand these temperatures without melting, discoloring,
offsetting, or releasing hazardous emissions.
Envelopes
Try a sample of any envelopes you are considering using with the printer before buying large
quantities. See "
Using the MPF (Multi purpose feeder)" for instructions on loading an
envelope.
When printing on envelopes:
To achieve the best possible print quality, use only high-quality envelopes that are
designed for use in laser printers.
For best performance, use envelopes made from 80 g/m
2
(20 lb bond) paper. You can
use up to 90 g/m
2
(24 lb bond) weight for the MPF as long as the cotton content is 25
percent or less.
Use only new, undamaged envelopes.
For best performance and to minimize jams, do not use envelopes that:
Have excessive curl or twist
Are stuck together or damaged in any way
Contain windows, holes, perforations, cutouts or embossing
Use metal clasps, string ties, or metal folding bars
–Have an interlocking design
Have postage stamps attached
Have any exposed adhesive when the flap is in the sealed or closed position
Have nicked edges or bent corners
Have rough, cockle, or laid finishes