Filter
Top Products
- 262 -
Once Toll Save mode is activated, your printer stores all of the documents to be faxed into
its memory and sends them at the programmed time.
To turn Toll Save mode off, follow steps 1
in "Toll Save Mode (Administrator only)" and then
press the left/right arrows until
Off
displays.
Using the Secure Receiving Mode (Administrator only)
You may need to prevent your received faxes from being accessed by unauthorized people.
You can turn on the secure fax mode using the Secure Receive option to restrict printing out
received faxes when the printer is unattended. In the secure fax mode, all incoming faxes
may go into memory. When the mode turns off, any faxes stored may be printed.
NOTE: If the display shows a Memory Full message, your machine cannot receive
fax. Delete any documents you no longer need from the memory.
To turn the secure receiving mode on:
1
Press
My Settings
Machine Setup
Fax Setup
Secure Receive
from the
home screen.
2
Select
On
in the
Configuration
.
3
Enter a four-digit passcode you want to use, using the keyboard.
4
Re-enter the passcode again and press
Check
() from the screen.
5
Press the home icon ( ) to return to Home Screen.
When a fax is received in the secure receiving mode, your printer stores it into memory
and displays
Secure Receive
to let you know that there is a fax stored.
To print received documents:
1
Press
Job Status( ) button
from the panel.
2
Select
My Settings
Machine Setup
Job management
Secure Receive Print
from the screen.
3
Enter the four-digit passcode and Press
Start
() from the screen.
The faxes stored in the memory are printed.
To turn the secure receiving mode off:
1
Press
My Settings
Machine Setup
Fax Setup
Secure Receive
from the
home screen.
2
Select
Off
in the
Configuration
.
3
Enter the four-digit passcode and press
OK
.
The mode is deactivated and the printer prints all of the faxes which have been stored
in memory.
4
Press the home icon ( ) to return to Home Screen.