Filter
Top Products
110 The Control Panel
Messages
The messages on the printer’s LCD show the printer’s current status or notify
you of errors. The following table lists the status messages. For error
messages, see "Error messages" on page 192.
Menu Settings
When to use Menu mode
The Menu mode lets you select printer settings similar to those you would
normally select in the driver or software, plus other settings, directly through
the control panel.
Note:
❏ Some applications may send commands to the printer that override the Menu
settings. If you are not getting the results you expect, check your application’s
settings.
❏ To see the current Menu settings, print a status sheet. See "Printing a status
sheet" on page 136.
Message Description
READY The printer is ready to print.
PRINTING The printer is processing data.
PLEASE WAIT Wait until READY appears.
PAUSE The printer is paused.
PRESS PAUSE BUTTON Press the Pause button.
CUTTING The printer is cutting the printout.
CHARGING INK The printer is charging the ink delivery system.
RESET The printer is being reset.
F/W UPDATING The printer is updating the firmware.
UPDATE
COMPLETE
The printer has finished updating the firmware.
POWER OFF The printer is being turned off.
CLEANING The printer is cleaning the print head.