Filter
Top Products
178 Maintenance and Transportation
Updating the printer driver information
After the replacement operation, update the driver information using the steps
below.
For Windows
Click the Main tab and make sure that the correct ink cartridge is displayed. If
not, set the information manually by clicking the Utility tab and then the
Printer and Option Information button.
For Mac OS X
Remove the printer from the Printer Setup Utility and then add it again.
Replacing the Maintenance Tank
If MNT TNK FULL or MNT TK NEAR FULL appears on the LCD, replace the
maintenance tank.
To check the product code of the maintenance tank, see "Maintenance tank"
on page 242.
To replace the maintenance tank, follow the steps below.
1. Make sure the printer is not printing or performing any other operations
(READY or PAPER OUT should appear on the LCD).
2. If you are using 220 ml ink cartridges, remove the four ink cartridges from
the right ink compartment. Make sure to close the ink compartment cover
after you have removed the ink cartridges.