Filter
Top Products
120 The Control Panel
When you select a paper margin setting other than DEFAULT, the following
number appears on the right side of the paper mark on the printer’s control
panel.
When you print the same data with a 3 mm margin and a 15 mm margin and
compare the printouts, you may notice that part of the data on the right side of
the 15 mm margin printout is missing.
PPR SIZE CHK
When you select ON, the printer stops printing if the width of paper loaded in
the printer does not match the width of your print. When you select OFF, the
printer continues to print even if the paper width does not match the width of
your print, and the printer may print beyond the paper.
Note:
❏ When you load the paper using the manual feed slot, select ON.
❏ When you perform borderless printing, select ON.
PPR ALIGN CHK
When you select ON, if the paper is not straight, PAPER NOT STRAIGHT appears
on the LCD and the printer stops printing. When you select OFF, a paper align
error does not occur even if the printer prints beyond the paper, and the printer
continues to print.
TIME OUT
The setting range is 30 to 300 seconds. If the cable of your printer is
unplugged or your printer hangs up for more than the set time range, the print
job is cancelled and the printer feeds the paper.
Paper Margin setting Number
T/B 15 mm 1
T/B 25 mm 2
15 mm 1
3 mm 0