Filter
Top Products
140 The Control Panel
LANGUAGE
You can select the language to be displayed on the printer’s LCD.
1. In Maintenance mode, press or to highlight LANGUAGE, then press
Menu.
2. Press or to select a language.
3. Press Menu to set the language. Confirm that READY (or a similar
message in the language selected) appears on the printer’s LCD.
Note:
It may take a while for READY (or a similar message in another language) to appear on
the printer’s LCD.
PAPER COUNTER
You can activate the paper remaining counter function. When this function is
on, ROLL COUNTER or SHEET COUNTER appears on the PRINTER SETUP menu.
1. In Maintenance mode, press or to display PAPER COUNTER, then press
Menu.
2. Press or to select the paper counter function you would like.
3. Press Menu to set the value.
UNIT
You can select a unit of measurement to use to display length. Follow the
steps below to select a unit.
1. In Maintenance mode, press or to select UNIT, then press Menu.
2. Press or to select a unit of measure.
3. Press Menu to set the value.
CUT PRESSURE
You can select cutting pressure.