Filter
Top Products
Problem Solver 193
WRONG PAPER SIZE The loaded paper size
does not match the data
size.
Match the loaded paper
size to the data size.
PAPER OUT No paper is loaded in the
printer or is loaded
incorrectly.
Load paper correctly.
Roll paper has run out
during printing.
Load a new paper roll.
NO BORDERLESS
WITH THIS SIZE
RELOAD PAPER
Note: These
messages display
alternately on the
LCD.
A2 size cut sheet media
has been installed for
borderless printing.
Install a different size of
cut sheet media or roll
paper.
RELOAD PAPER The printer cannot
detect the loaded cut
sheet media, because it
is wavy or curled.
Flatten the cut sheet
media.
The printer cannot
detect the loaded
paper.
Move the paper lever.
NOT STRAIGHT
RELOAD
Cut sheet media is not
loaded straight, and
needs to be aligned.
Load the cut sheet
media correctly. See
"Loading cut sheet
media" on page 153.
PAPER NOT
STRAIGHT
The paper is not loaded
straight.
Load paper straight.
COMMAND ERROR
CHECK DRIVER
SETTINGS
Damaged data has
been sent to the printer.
Stop printing, and press
the pause button for 3
seconds.
The printer receives data
with a wrong command.
The installed printer driver
is not correct for the
printer.
Stop printing, and press
the pause button for 3
seconds. Then make sure
that the installed printer
driver is correct for the
printer.
REPLACE INK CRTG The ink cartridge is
expended.
Replace the expended
ink cartridge with a new
one. See "Replacing Ink
Cartridges" on page 169.
Message Description What to do