Filter
Top Products
134 The Control Panel
Selecting paper settings
You can register and recall your own paper settings for any media.
The paper settings you can make are:
Registering the settings
Follow the steps below to register paper settings for a particular type of media.
1. Load the paper that you want to register.
2. Press Menu to enter the printer’s menu system, press or to
highlight CUSTOM PAPER, then press Menu again. You see
PAPER NUMBER.
3. Press Menu, then press or to select a paper configuration
number (No. 1 to No. 10).
4. Press Menu to save your paper number selection.
5. Press , then press . You see PLATEN GAP in the lower row of the LCD.
6. Press Menu, press or to select NARROW, STANDARD, WIDE, or
WIDER, then press Menu again to save the selected platen gap setting.
7. Press , then press . You see THICKNESS PAT in the lower row of the
LCD.
8. Press Menu twice to print the paper thickness test printing pattern.
❏ Platen gap
❏ Thickness pattern
❏ Thickness number
❏ Cut method
❏ Paper feed adjustment
❏ Eject roller type
❏ Drying time
❏ Suction
❏ MicroWeave adjustment