Filter
Top Products
3.5 Various settings according to your needs
ScanSnap S510M Operator's Guide 91
Basic Scanner Operations
3
7. Press the [SCAN] button .
⇒ Scanning is started and the image data is generated in the specified size.
ATTENTION
• The image is centered and output in the specified size.
When "Automatic detection" is selected in the "Output image size" drop-
down list of the "Carrier Sheet Settings" window, an optimal size is selected
automatically from the available standard sizes (refer to page 55) and the
image is output.
• In the "Carrier Sheet Settings" window, when "Automatic detection" is
selected in the "Output image size" drop-down list, the size of the produced
image may be smaller than the original.
Example: When you scan the A5 size image printed at the center of an A4
size paper
D A5 size image is output.
To output an image in the original size, specify the document size in the
[Output image size] drop-down list
HINT
If the following symptoms are observed, lay the material over a piece of white
paper to scan.
• The output image is not in a suitable size (when [Automatic detection] is
selected).
• The outline of the material is shaded.
• Black lines appear around the material cut out in an indefinite shape.
white paper