Filter
Top Products
+LJK
5HVROXW LRQ
3ULQWLQJ
$GYDQFHG3ULQWLQ J)HDWXUHV
Your printer offers greatly improved print quality at 600 and 1200 dpi.
To take best advantage of these higher resolutions use
The resident PostScript and PCL 5e typefaces
The QMS printer drivers designed for your printer
»Note:
Whenever possible, set the print resolution through your
application. If the print resolution can’t be set through the application,
through the printer driver, through the printer configuration menu, or
through QMS Document Option Commands.
6PRR WK LQJ
Your 2425/2425
TURBO
Print System offers a smoothing option
under the Administration/Engine/Print Quality menu. See chapter 4,
“Printer Configuration,” of
Reference
for details on this QMS edge-
smoothing technique which alters the size and position of dots that lie
on the outer edges of an object by reducing the width of the laser
pulse to a fraction of the full pulse width. It smooths jagged-edges in
text, lines, and graphics and generally improves their print quality.
»Note:
When you are printing halftones, smoothing is not
recommended because it may introduce artifacts in the halftone or
scanned image. For better results, if smoothing is required for your
documents in text and line art, use the basic option for halftone types.
+RZ0X FK0H PRU\'R< RX1HHG"
Your QMS 2425/2425
TURBO
Print System base model comes with 8
MB of memory, the executive model comes with 24 MB of memory,
and the 2425
TURBO
EX comes with 32 MB of memory.
The following tables list the minimum framebuffer and total system
memory requirements for each resolution/media combination.
»Note:
If a certain resolution is chosen and the minimum amount of
memory is not installed in the printer, the file is printed using the next
lower resolution. For example if you have a base-model printer and
you choose 600 dpi resolution, legal media, and duplex (optional
duplexer required), but the printer has only the standard memory
instead of the required 10 MB minimum, the file prints at 300x300 dpi.