Filter
Top Products
7HVWLQJ3&
3ULQWHU
&RPPXQLFDWLRQ
406785%23ULQW6\VW HP2SHUDWLRQ
a If the AUTOEXEC.BAT file contains the line
MODE LPT1:=COM1:
delete it.
b Then type
MODE LPT1:,,P↵
The “P” represents infinite retry and it tells the PC to send
print jobs until the printer accepts them.
c Restart the PC and retry the communication test.
See chapter 6, “Troubleshooting,” of
Operation
and refer to
your DOS documentation for more information.
6HUL DO&RPPXQLFDWLRQ
»Note:
The serial interface is an option which must be purchased
through your QMS vendor. See appendix A, “QMS Customer
Support,” for a list of locations and telephone numbers.
1 To send the PRINTEST.PS file you just created to the printer,
type
print printest.ps↵
2 If you’re prompted for the name of the list device, type
com1↵
or type the name of the PC’s serial port to which the printer is
connected (for example, com2 or com3).
»Note:
If the PC has more than one serial port, they're probably
labeled. If not, check the PC’s documentation for the COM port
names.