Filter
Top Products
6WDWXV
0HVVDJHV
406785%23ULQW6\VW HP2SHUDWLRQ
6 HUYLFH0HV VDJHV
When the printer requires service, operation stops and the message
window displays CALL FOR SERVICE followed by the location of the
problem and error number. Have this information available when you
call for service.
»Note:
A service message sometimes occurs as a result of an unusual
combination of events, not because of an actual problem. When the
printer stops and a service message displays in the message window,
turn the printer off and back on. This often clears the service
message indicator and printer operation resumes. Always try this
before making a service call.
Service calls should be placed to the vendor from whom you pur-
chased the printer. If you cannot get service from your vendor, see
appendix A,“QMS Customer Support,” for contact information.
WAITING FOR IDLE
An active job is in process.
Access to the menu is not
allowed until the job is
finished.
Wait until the print
job is finished and
the printer goes
idle.
WAITING ON INPUT
END JOB?
The compiler is waiting on
incoming data for the first
job in the queue. The job
may not have an end-of-
job indicator and therefore
cannot end. The message
clears if more input arrives
from the port or if you
press the Cancel key. No
other jobs can be printed
until this job has ended.
Wait until the job is
finished and the
printer goes idle to
access the
configuration menu.
WARMING UP
The printer is warming up. Wait until the
IDLE
message displays
before printing.
This status message... means... do this...