Filter
Top Products
6WDWXV 0HVVDJHV
7URXEOHVKRRWLQJ3ULQWHU3UREOHPV
PUT
SIZE
PAPER IN
INPUTBIN
BIN
That Operator Control/
Chain Inputbins is set to
Off and that the displayed
cassette or tray is empty.
Refill it with the specified
size media. In the case of
a cassette,
SIZE
is the
media size detected by the
engine. In the case of the
tray, the
SIZE
is the media
size of the tray configured
in the Operator Control
Multipurpose Sz menu.
INPUTBIN
is the empty
cassette or tray (the
default input bin set i the
Administration/Engine/
Inputbin # menu).
Refill the empty
cassette with the
specified media
size.
PUT
SIZE
PAPER IN
ANY
BIN
That Operator Control/
Chain Inputbins is set to
On and that a chained
inputbin is empty.
Refill the empty
inputbin with the
specified paper size.
RESETTING ACCOUNTING The reset accounting
operation is in process.
TEST PRINT A test print page is
printing.
TONER ABSENT The toner cartridge is not
installed.
Install a toner
cartridge.
TONER LOW The toner is low. There is
enough toner to print
about 100 pages from the
point the message first
appeared.
Replace the toner
cartridge. Refer to
chapter 2,
“Consumables,” for
details.
TRANSPORT JAM Media has jammed while
passing through the
engine.
Locate and remove
the jam. See
“Media Jams” on
page 6-18.
This status message... means... do this...