Filter
Top Products
39
Applicable to: Manual shooting mode M
Ⅵ Set to the Manual shooting mode.
Displays the color bar on the screen and starts recording in
this state. (See below)
There are two ways to display the color bar.
Ⅵ Set [COLOR BAR] in the [CAMERA PROCESS] menu to
[ON]. (A Page 61)
Ⅵ Set [USER1], [USER2], or [USER3] in the [CAMERA
SETTINGS] menu to [COLOR BAR], then press the
corresponding USER button.
Assignment of USER buttons: (A Page 21, 65)
● The color bar appears.
Memo :
● Between the two methods above, setting via the USER
button is given a higher priority.
● When in the Full Auto shooting mode, the color bar will not
appear.
Ⅵ Clearing the color bar display
Set the [COLOR BAR] menu to [OFF].
Alternatively, press the USER button that is set as
[COLOR BAR].
Applicable to: Full Auto shooting mode A, Manual shooting
mode M
The picture quality of the camera can be set using the
[CAMERA PROCESS] menu.
Adjustment screens are displayed for the following items in
the [CAMERA PROCESS] menu.
As the adjustments are shown on the screen, you can adjust
the values while checking the picture quality on the camera.
Ⅵ DETAIL LEVEL
Ⅵ DETAIL V/H BALANCE
Ⅵ GAMMA LEVEL
Ⅵ COLOR GAIN
For details of the respective items, see the [CAMERA
PROCESS] menu. (A Page 59)
Example: DETAIL LEVEL
1 . Adjust accordingly.
Push the Set Lever to the left or right.
● Doing so moves the slide bar in the same direction. The
detail level of the camera image changes according to the
movement along the slide bar.
2 . Confirm the adjusted value.
Press the center of the Set Lever.
● The menu screen closes.
Memo :
● When the setting values of the [GAMMA], [COLOR
MATRIX], and [KNEE] items in the [CAMERA PROCESS]
menu are altered, the change is reflected instantly on the
screen. (A Page 59)
Displaying the Color Bar
Ⅵ Recording the color bar
When the [SYSTEM SELECT], [REC MODE] menu is as
below, the color bar can be recorded.
Ⅵ On-screen display on the external monitor
If the [SYSTEM SELECT] menu is set to [720-**], the on-
screen display will appear as usual when the color bar is
output on the external monitors below. ([DISPLAY ON TV]
setting in the [CONNECTION SETTINGS] menu is invalid.)
● A/V OUT terminal
● D1 (480i/576i) output of COMPONENT OUT terminal
● 480i/480p/576i/576p output of HDMI terminal
SYSTEM SELECT REC MODE
1080-60/30 1920/60i(HQ), 1920/30p(HQ)
1080-50/25 1920/50i(HQ), 1920/25p(HQ)
720-60/30 1280/60p(HQ), 1280/60p(SP)
720-50/25 1280/50p(HQ), 1280/50p(SP)
Adjusting the Camera
Image
0
Slide Bar
Detail Icon
M9H7_EN_001D.book Page 39 Thursday, August 26, 2010 11:51 AM