Filter
Top Products
41
Applicable to: Video shooting mode, video playback mode
Ⅵ Connecting the headphone
Connect the headphone to the headphone ( ) jack.
Ⅵ Setting the headphone sound to mixed sound or
stereo sound
Menu settings
Set the [AUDIO MONITOR] menu.
(A Page 64)
Ⅵ Adjusting the headphone’s audio level
Turn the ADJ./VOL. knob.
Applicable to: Video shooting mode
Displaying the Time Code/User’s Bit
Menu settings
Ⅵ Set [TC DISPLAY] in the [TC/UB] menu to [TC] or [UB].
TC: Displays the time code.
UB: Displays the user’s bit.
Recording the Time Code
The time code of the camcorder’s built-in time code
generator as well as user’s bit can be recorded. The time
code generator comes in the preset and regeneration
modes. When in the preset mode, you can set the time
code and user’s bit freely. (A Page 42)
Ⅵ Recording time code and user’s bit in the preset
mode
Menu settings
Set [TC GENE.] in the [TC/UB] menu to [FREE] or [REC].
FREE : The time code operates in the run mode at all
times.
REC : The time code operates in the run mode only
during recording.
Ⅵ Recording time code in continuation of the
recorded time code on the SD card
Menu settings
Set [TC GENE.] in the [TC/UB] menu to [REGEN].
Memo :
● When recording is stopped and the SD card is removed,
the time code will be displayed as follows.
[REC], [REGEN] : Time code generated when the
recording was last stopped.
[FREE] : Operates in the run mode at all times.
Monitoring Audio Sound
Using a Headphone
MIC
Headphone Jack
DC
OPEN
REC
PUSH
IRIS
SHUTTER
AE
ADJ./ VOL.
CLOSE
ACCESS
ADJ./VOL.
Knob
Time Code Recording
Setting
Time Code
M9H7_EN_001D.book Page 41 Thursday, August 26, 2010 11:51 AM