Filter
Top Products
56
Other Features
You can select whether to enable the operation sound as well
as illumination of the tally lamp.
Operation sound
Set using [OPERATION SOUND] in the [CAMERA
SETTINGS] menu. (A Page 66)
When this is set to [ON], operation sound is output from the
built-in speaker.
If a headphone is connected, no operation sound will be
output from both the built-in speaker and headphone.
Tally lamp
Set using [TALLY] in the [CAMERA SETTINGS] menu.
(A Page 66)
When this is set to [ON], the tally lamp lights up in the
recording mode.
The hour meter displays the total time during which the
power of the camcorder is turned on.
1 . Select [HOUR METER] in the [DISPLAY SETTINGS]
menu. (A Page 65)
2 . Press the center of the Set Lever.
● The hour meter appears.
3 . Press the center of the Set Lever again.
● Returns to the menu screen.
You can reset the menu settings to their default values.
However, the time code/user’s bit, date/time, and hour meter
cannot be reset.
1 . Select [RESET ALL MENU] in the [CAMERA
SETTINGS] menu.
2 . Press the center of the Set Lever.
● The [RESET ALL MENU] screen appears.
3 . Restore the default settings.
Push the Set Lever up or down to select [EXECUTE].
Next, press the center of the Set Lever.
● The menu screen closes, and the settings are reset to
their default values.
The camcorder reboots automatically if there are changes
in the [SYSTEM SELECT] menu.
Operation Sound and Tally
Settings
Displaying the Hour Meter
Restoring the Default
Settings
SELECT SET
MENU
QUIT
RETURN SETTINGS TO
DEFAULT SETTINGS?
EXECUTE
CANCEL
M9H7_EN_001D.book Page 56 Thursday, August 26, 2010 11:51 AM