Filter
Top Products
90
14. OTHERS
4200
Operation stops. All operations
are rejected.
TROUBLES WITH ERROR CODE OUTPUTS
Error Code
Error Details GY-DV500 Operation Remedy
3200 Tape loading impossible. Operation stops. All operations
are rejected.
Switch the power OFF and then
switch it back ON. However, the tape
may be damaged depending on the
situation. Please consult the person
in charge of professional video
equipment at your nearest JVC-
authorized service agent.
3300 Tape unloading impossible.
5606 to 5607 Tape is slack. Operation stops. All operations
are rejected.
Switch the power OFF and then
switch it back ON. However, the tape
may be damaged depending on the
situation. Please consult the person
in charge of professional video
equipment at your nearest JVC-
authorized service agent.
5702 Tape end sensor error. Operation stops. All operations
are rejected.
5802 Tape beginning sensor error. Operation stops. All operations
are rejected.
7001 Drum rotation stopped. Operation stops. All operations
are rejected.
Switch the power OFF and then
switch it back ON. However, the tape
may be damaged depending on the
situation. Please consult the person
in charge of professional video
equipment at your nearest JVC-
authorized service agent.
7101 Capstan rotation stopped. Operation stops. All operations
are rejected.
7202 to 7203 Supply reel rotation error. Operation stops. All operations
are rejected.
7302 to 7303 Take up reel rotation error. Operation stops. All operations
are rejected.
7305 Irregular tape winding when
unloading.
4000 Irregular cassette intake
operation.
Operation stops. All operations
are rejected.
4100 Irregular eject operation. Operation stops. All operations
are rejected.
14-1 Troubleshooting (Cont'd)
Cassette housing abnormality. Operation stops. All operations
are rejected.
Operation stops. All operations
are rejected.
5605 Tape is cut. Operation stops. All operations
are rejected.
Open the cassette cover by using the
EJECT switch and then switch the
power ON again.
For servicing
See the service manual page 1-22 “1.16 WARNING CODES”.
←
89
14. OTHERS
In the case of troubles occurring during operation of the GY-DV500, it performs a self-test to identify the cause and displays the
result in the form of an error code. The error code consists of the "main code" which indicates its contents and the "sub-code" which
indicates the details. Depending on the status of the GY-DV500 at this time, indications may also appear on the LCD display, the
WARNING indicator may activate and the alarm tone may be generated.
In the viewfinder, the "VTR WARNING (DEW)" indication appears when condensation is detected, and the "VTR WARNING (STOP)",
"VTR WARNING (HARD)" or "VTR WARNING (REW)" indication appears depending on the contents of the error code when some
of the other error codes are displayed.
* In the Auto OFF status, it is impossible to operate the GY-
DV500. This condition can be cancelled by switching the
POWER switch OFF and then switching it ON again. If the
same problem occurs again after the power is turned ON,
there may be something wrong with the GY-DV500. Please
consult the person in charge of professional video equipment
at your nearest JVC-authorized service agent.
WARNING indicator Alarm Tone Display GY-DV500 Operation
Red. blinking
Continuous "Error code" • Automatically ejects the cassette. It can be inserted again.
"Error code"
plus
"AUTO OFF"
• Automatically stops operation or ejects the cassette.
(Auto OFF) * The GY-DV500 does not accept any operation.
Red, blinking
Intermittent "DEW " • Dew condensation inside the unit.
The GY-DV500 does not accept any operation until the DEW indicator
disappears from the display.
LIGHT
ON
OFF
COUNTER
CTL
TC
UB
RESET
OPERATE/WARNING
MONITOR
SELECT
STATUSSHUTTER
MENU
FILTER
1 3200k
2 5600k
3 5600k+ND
POWER
NG
G
A
I
N
O
U
T
P
U
T
W
H
T
.
B
A
L
V
T
R
ON OFF
ALARM
MONITOR
CH-1
CH-2
AUDIO
LEVEL
AUTO IRIS LOLUX
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK
H
M
L
S
A
V
E
S
T
B
Y
B
A
R
S
C
A
M
O
N
O
F
F
A
U
T
O
K
N
E
E
P
R
S
T
A
B
AUTO OFF DEW
VTR WARNING (HARD)
VTR WARNING (DEW)
Main code
Dew condensation
indicator
Sub-code
ALARM
tone
EARPHONE
TALLY lamp
WARNING indicator
TALLY
lamp
Auto-OFF indicator:
Lights depending on the error code.
When this indicator lights, the
GY-DV500 will automatically stop
operation or eject the cassette. The
GY-DV500 does not accept any
operation.
14-1 Troubleshooting (Cont'd)
The GY-DV500 is a microcomputer-controlled piece of
equipment, which may malfunction due to external noise
or interference. In this case, set the POWER switch to OFF,
remove the lithium backup battery, and then set the
POWER switch to ON again after a few minutes.