Filter
Top Products
122
Advanced playback
Copy
Image files can be copied from one memory card to another. Up to 29MB of data can be trans-
ferred. Every time the copy function is used, a new folder is automatically created for the image(s).
This frame - To copy the image currently displayed.
Marked frames - To copy single or multiple images. When selected, the frame-selection screen (p.
118) will appear; highlight the images to be copied with the yellow border and then press the up key
of the controller to mark it with the check indicator. To deselect an image, highlight the selected
thumbnail and press the down key; the check indicator will disappear. Continue until all the images
are marked. Press the central button of the controller to continue, or press the menu button to can-
cel the operation and return to the playback menu.
When the controller is pressed, a screen with four messages will
be displayed; the messages are highlighted as the copying proce-
dure is executed. If too many images have been selected, a warn-
ing will appear and the copy routine will be canceled. Divide the
number of images into two or three batches.
When the change-CF-card message is highlighted, remove the
camera’s memory card and insert the card to which the image is
to be copied. If the card has insufficient space, the card-full
warning is briefly displayed; insert a different card or press the
menu button to cancel the routine. Press the central button of the
controller to continue.
Change CF card.
Copying to CF card.
Copying completed.
Enter
Copy
Copying to camera memory.