Filter
Top Products
:enter
Save to memory
:select
72
Advanced recording
Memory - Storing Camera Settings
To save the current camera settings, turn the function dial to the M
SET position and press the function button to open the register-
selection screen; the current camera settings are displayed.
Camera settings cannot be deleted from memory by turning the camera off. They are erased with
the reset function in section 3 of the setup menu.
On the register-selection screen, use the control dials or
left/right keys of the controller (1) to select the memory
register in which to store the settings; any previous set-
tings are replaced. Press the central button of the con-
troller (2) to complete the operation. The menu button
cancels the operation without saving the settings.
Five sets of camera settings can be saved. This saves time under frequently repeating conditions by
eliminating the need to set the camera. Except for functions like subject programs, data imprinting,
voice memo, and instant playback, most recording-mode camera settings will be saved including
the position of the Flex Focus Point, the display mode, and changes made with the function dial
and digital effects control. Settings are displayed before being saved. Although the Digital Effects
bracketing drive mode setting can be saved, the type of bracket, contrast, color saturation, or filter,
must be reset with the Digital Effects Controller.
1
2