Konica Minolta DiMAGE_A2 Digital Camera User Manual


 
22
Getting up and running
Charging the Battery
Before the camera can be used, the lithium-ion battery must be charged. Before charging the bat-
tery, read the safety warnings on page 4 of this manual. Only recharge the battery with the supplied
battery charger. The battery should be recharged before each shooting session. See page 170 for
battery care and storage.
With the battery contacts toward the charger, align the channels
on the bottom of the battery with the tabs on the charger unit.
Slide the battery into the unit.
Plug the power cord into the back of the charger unit (1). Plug
the other end of the cord into a live household outlet. The includ-
ed AC cord is designed for the current of the sales region. Only
use the cord in the region it was purchased. For more on the AC
cable, see page 167.
Slide and lift the battery to remove it from
the charger. Unplug the power cord
from the outlet.
The indicator lamp (2) will glow to show the battery is charging.
The lamp will go out when the battery is charged. Charging time
is approximately 150 minutes.
1
2