Konica Minolta DiMAGE_A2 Digital Camera User Manual


 
157
1.Insert a memory card in the camera and connect it to the computer with the USB cable. Other devices
must not be connected to the computer during this procedure.
2.Right click on the My-computer icon. Select “properties” from the drop-down menu.
Windows XP: from the start menu go to the control panel. Click on the performance and maintenance
category. Click “System” to open the system properties window.
3.Windows 2000 and XP: select the hardware tab in the properties window and click the device-manager
button.
Windows 98 and Me: click the device-manager tab in the properties window.
4.The driver file will be located in the universal-serial-bus-controller or other-devices location of the device
manager. Click on the locations to display the files. The driver should be indicated with the camera
name. Under certain conditions, the driver name may not contain the camera name. However, the driver
will be indicated by either a question mark or exclamation point.
5.Click on the driver to select it.
6.Windows 2000 and XP: click on the action button to display the drop-down menu. Select “uninstall.” A
confirmation screen will appear. Clicking “Yes” will remove the driver from the system.
Windows 98 and Me: click the remove button. A confirmation screen will appear. Clicking “Yes” will
remove the driver from the system.
7.Disconnect the USB cable and turn off the camera. Restart the computer.
Removing the Driver Software - Windows