Filter
Top Products
1.Turn off the television and the camera.
2.Insert the single plug of the AV cable into the camera’s AV-out
terminal.
3.Plug the other end of the AV cable into the video and audio input
terminal on the television. The yellow plug is for the video output,
and the white plug is for the monaural audio output.
4.Turn the television on.
5.Change the television to the video channel.
6.Turn on the camera and set the mode switch to the playback
position. The camera’s monitors will not activate when the camera
is attached to a television. The playback-mode display will be
visible on the television screen.
7.View images as described in the playback section. Use the
television controls to adjust the volume of the audio playback.
Because of the broadcast standard used to display television
images, image quality and resolution will appear lower than when
displayed on a computer monitor.
128
Advanced playback
Viewing Images on a Television
It is possible to view camera images on your television. The camera has a video-out terminal which
can be used to connect the camera to a television using the supplied AV cable. The camera is com-
patible with the NTSC and PAL standards. The video-output setting can be checked and set in sec-
tion 1 of the setup menu (p. 129).
2
3
6