Filter
Top Products
158
Data-transfer mode
PictBridge
Use the left/right keys of the controller to display
the image to be printed.
Total number of prints
Number of copies
Press the up key to select the number of copies
to be printed. To deselect an image for printing,
press the down key until the number of copies
reaches zero. A maximum number of fifty images
can be printed.
Repeat the previous steps until all the images to be printed are selected. Press the cen-
tral button of the controller to continue.
The information (i+) button switches between the single frame and index playback formats on the
PictBridge screen. Enlarged playback, activated with the magnification button, can be used to
examine image files on the screen.
Confirm the transfer-mode option in section 1 of the setup menu is
set to PTP. Connect the camera to a PictBridge compatible printer
using the camera’s USB cable. The larger plug on the cable is con-
nected to the printer. Open the AV out/ USB port cover and insert
the smaller plug of the cable into the camera. Turn the camera on;
the PictBridge screen is displayed automatically.
:select:move :print
Individual still images can be selected for printing on the PictBridge screen; TIFF, RAW and images
with an embedded color profile (p. 102) are not displayed and cannot be selected. For other printing
options, see the menu navigation section on page 160.