Filter
Top Products
8 / 26 11 / 36 16 / 52 22 / 72
93
The chart lists approximate guide numbers for manual flash calculations. The following equations
are useful in determining the guide number (GN), aperture (ƒn), or flash-to-subject distance required
for exposures.
Guide no. (for distance in meters / feet)
Manual
flash
1/1 (Full)
1/4
1/8
100 200 400 800
Camera sensitivity (ISO)
4 / 13
2.8 / 9.2
5.6 / 18 8 / 26
8 / 265.6 / 18
11 / 36
GN = ƒn. X dist.
GN
ƒn.
= dist.
GN
dist.
= ƒn.
4 / 13
Maxxum/Program Flash 2500(D), 3600HS(D), 5600HS(D), Macro Ring Flash 1200, and Macro
Twin Flash 2400 are compatible with this camera. ADI flash metering works with the three
Maxxum/Program flashes attached to the accessory shoe. See the flash manual on how to set
ADI metering. The use of other flash units is not recommended.
With the Maxxum/Program Flash 5600HS(D) and 3600HS(D), the flash-metering mode will
automatically switch to pre-flash TTL when the bounce-flash or wireless/remote function is
used, or the flashes are connected to the camera with an off-camera cable. Pre-flash TTL
automatically activates when using the macro flash units. When using bounce flash with the
Maxxum/Program Flash 2500(D), set TTL with the metering mode switch on the flash unit or
pre-flash TTL on the recording menu on the camera.
When using the Maxxum/Program flash units, if the flash illumination is uneven at the camera’s
wide-angle lens position, attach the wide-angle adapter to the flash units. With the 3600HS(D),
also change the flash metering mode to pre-flash TTL. When the auto-zoom function is used
with the Maxxum/Program 3600HS(D) and 5600HS(D) flash units, the flash’s zoom setting will
be wider than the lens setting.
When using the Macro Ring Flash 1200 or Macro Twin Flash 2400 in macro mode (p. 49), light
fall off toward the edges of the frame may be noticeable at the wide-angle macro lens position.
Flash Notes
1/2
5.6 / 18 8 / 26 11 / 36 16 / 52
M1/16
2 / 6.6 5.6 / 184 / 132.8 / 9.2
6.3 / 21
64
3.2 / 10
2.2 / 7.2
4.5 / 15
1.6 / 5.2