Filter
Top Products
159
The number of prints in the print run is displayed as well as the
print parameters selected with the menu. See the menu navigation
section for more information (p. 160). Press the central button of
the controller to begin printing, or press the menu button to return
to the PictBridge screen.
Once printing begins, the operation can be canceled by press-
ing the center of the controller. The printing-finished message
indicates the end of the operation; turn the camera off to end
the routine.
If the battery is exhausted before the print run is complete, printing is canceled. Use a fully-charged
battery or the optional AC adapter.
If a minor problem occurs during printing, such as the paper runs out, follow the procedure recom-
mended for the printer; no action is required for the camera. If a major printer error occurs, press
the center of the controller to end the routine. Refer to the printer manual for the correct procedure
for the printer problem. Check the printer settings before starting again and deselect the images
that were printed.
Notes on Printing Errors
Printing finished.
OK
No. of prints: 7
Print size: Printer setup
Layout: Printer setup
Print quality: Printer setup
Data print: Printer setup
:start