Filter
Top Products
135
Transfer Mode
The data-transfer mode must be specified depending on whether the camera is used to transfer
data to a computer, print images with a PictBridge compatible printer, or record images with the
optional DiMAGE Capture software. Select the appropriate option:
Data storage - to transfer data between the camera and a computer. This option must be selected
when moving image files to a computer or when using the DiMAGE Viewer software.
PTP - to print images with a PictBridge compatible printer.
Comp. control - to record images from a computer using the optional DiMAGE Capture software. A
firmware update is provided with DiMAGE Capture to activate this option.
EVF Auto Switch
This option controls the auto-display function in the recording and movie
mode (p. 39). Two setting are available:
Auto EVF/LCD - the EVF’s eye sensors switch between the EVF and LCD
monitor automatically.
EVF auto on - the LCD monitor is turned off and the eye and grip sensors
activate the EVF when in use. This setting will help conserve battery power.
The grip sensor can be disabled in section 4 of the setup menu.
Language
The language used in the menus can be changed.
Video Output
Camera images can be displayed on a television (p. 128). The video output can be changed
between NTSC and PAL. North America uses the NTSC standard and Europe uses the PAL stan-
dard. Check which standard is used in your region to play back images on your television set.