Konica Minolta DiMAGE_A2 Digital Camera User Manual


 
96
Recording menu
Interval Setup
The parameters for the interval drive mode (p. 66) are set in section 2 of the recording menu (p. 80).
Int. set
Bracket set
Enter
Select “Enter” in the interval-set option in section 2 of
the recording menu. Press the center of the controller to
open the setup screen.
Interval 1 min
No.of frames 2
Start time No delay
:enter
Int. set
On the setup screen, use the up/down controller keys
to highlight the parameter to be changed and then
press the right controller key. Use the up/down keys to
change the parameter. Use the left controller key to
return to the parameters. Continue until the parameters
are set.
Press the center of the controller to complete the operation. The menu button closes
the screen and cancels any changes.
Bracketing Setup
0.3 Ev
bracket
0.5 Ev
bracket
Normal
Under
Over
When making an exposure bracket (p. 62), the exposure difference between frames can be set to
0.3EV or 0.5Ev. This is set in section 2 of the recording menu (p. 80).