Filter
Top Products
64
Advanced recording
Continuous-advance mode allows a series of images to be captured while holding down the shut-
ter-release button. Continuous advance acts like a motor drive on a film camera. TIFF and RAW &
JPEG image quality cannot be used. RAW cannot be used with UHS continuous advance.
Continuous Advance
Turn the function dial to the drive mode position (1).
Press the function button in the center of the dial (2).
Turn the front control dial to select the continuous-
advance drive mode (3). Use the rear control dial (4) to
switch between standard, high-speed, and UHS contin-
uous advance. Press the shutter-release button partway
down or press the function button to set the mode.
Continuous advance - captures a maximum of three images at 1.8fps. When used
with continuous autofocus, the camera adjusts the focus during the series. The live
image is briefly displayed between frames.
High-speed continuous advance - captures a maximum of three full-size images at
2.7fps. The rate of capture decreases with images smaller than 3264 X 2448. Focus is
locked with the first frame regardless of the focusing mode. The monitor turns off dur-
ing the series.
UHS continuous advance - captures multiple 640 X 480 size images at 7fps. The
approximate number of frames that can be captured at one time depends on the image
quality setting: extra fine - 100, fine - 160, standard - 180. The digital zoom and flash
cannot be used. Shutter speeds must be 1/30 secondor faster. Very bright light sources
within the image may cause streaking. Black areas caused by a loss of data may be
apparent.
1
2
3
4