Kowa nonmyd WX 3D Digital Camera User Manual


 
12
3 Saving captured images
Save captured images using the methods described in 3.1 or 3.2 below.
3.1
Saving captured images in PC (optional device)
Install the supplied ling software into the PC (optional device).
Use a USB cable supplied to connect a PC to the instrument. Captured images will be stored in the PC after it is con-
nected to the instrument.
About the PC
For details of the specication of the required PC, see the attached
“Installation manual (ling software)”
and
“User’s guide (ling software)”.
x
Do not use any USB cable other than the supplied cable.
x
Using other USB cable may inhibit normal operation.
k
For information on how to connect the PC to the instrument as well as details of how to use the software, see the
attached
“Installation manual (ling software)”
and
“User’s guide (ling software)”
.
3.2 Saving captured images in a SD card
Insert a SD card into the digital camera.
Captured images will be stored in the SD card.
Captured images saved in a SD card
Captured images saved in a SD card may be displayed on the LCD monitor of the digital camera. The images may
be printed out connecting the digital camera to a printer. Contact Kowa or your Kowa dealer for details.
x
The photographed images are not saved in the SD card when the instrument is connected with the PC.