Filter
Top Products
24
7.1.1 Selecting mosaic mode photography
Press mosaic button (the button above “MENU” button).
You can switch between Normal mode and SP mode during mosaic mode
photography.
7.1.2 Selecting an internal xation target
Internal xation target selection button becomes disabled during mosaic mode photography. Mosaic mode photography
has two types of internal xation target setting methods, “AUTO” and “
MANUAL
” settings.
In “Auto mode setting”, one of the internal xation targets is sequentially selected in the predened order.
In “Manual setting”, an internal xation target is selected manually by pressing one of the keys corresponding to the pho-
tographing parts of the eye.
The default setting is “Auto mode setting”.
For changing the setting, refer to
“9.3 Mosaic internal xation target setting (Switching internal xation target in
mosaic mode photography)”.
L
Switching the internal xation target in mosaic mode photography – Use in auto mode
Anterior segment observation display Retinal observation display
The position of the anterior segment working dot position aids on anterior segment observation display changes
depending on the photographing part of the eye.
In auto setting, one internal xation target is automatically switched to another after completing each photography and
the corresponding photographing part of the eye is also changed consequently.
When you want to photograph again because of poor photo quality, press the left key of the menu buttons.
The internal xation target that corresponds to the last photographing part illuminates.
When you do not need to photograph the area currently selected, press the right side button of the menu button. This
switches the current part to the next photographing part and the internal xation target that correspond to the next
photographing part illuminates.
1a to 9a shown on the bottom of LCD monitor indicate the mosaic mode photography sequence selected in menu
mode. When a photograph is taken, the corresponding number becomes highlighted. Pressing shutter button by
mistake while observing anterior segment does not allow the next photographing part to appear since an image
capturing must be repeated again.
For details of the mosaic mode photography sequence setting, refer to
“9.3.2 Setting of auto mode”
.
7.1 Mosaic mode photography