Filter
Top Products
Retinal observation light intensity control knob
Exposure compensation knob
Exposure compensation indicator
Diopter compensation knob
14
5.1 Preparing the instrument
1
Make sure that the moving component xing screw is completely loosened.
2
Make sure that the instrument is correctly connected to the PC.
Make
sure that the PC is turned ON and the application software is started.
3
Remove objective lens cap.
4
T
urn ON the power switch (place it in “ | ” position).
5
Make
sure that retinal observation light intensity control knob, exposure compensation knob and diopter compensation
knob are in their initial position.
The initial positions for the knobs are as below
Retinal observation light intensity control knob
: Approx. 10-o’clock position
Exposure compensation knob : 0
(The indicator under the knob turns OFF at the reference position.
When it is at a position other than the reference position, the indica-
tor illuminates.)
Diopter compensation knob : Pre
ssed position. (“D+” or “D-” does not appear on LCD monitor
when it is in the initial position.)
5 Preparations for photography