Filter
Top Products
34
9.3 Mosaic internal xation target setting (Switching internal xation target in mosaic mode photography)
9.4 Other setting menu
9.4.2 POWER ON MODE 2
This item allows you to select the state of Blue/Brown selection switch when
turning the instrument is turned ON.
Setting
BROWN : Brown eye (Factory setting)
BLUE : Blue eye
How to set
P
ress “
F
” or “
E
” button to switch the setting while “POWER ON
MODE 2” is selected. Select “END” and press menu button while the
setting of your choice is highlighted to conrm the setting and return to
menu item selection.
9.4.3 SLEEP MODE
You can select “SLEEP MODE” (power saving mode) as the initial power mode
when the instrument is turned ON. When this instrument is not operated for a
certain period of time (approximately 10 minutes) it goes into “SLEEP MODE”.
In “SLEEP MODE, the LCD” monitor and all lamps of observation illumination
lamps except the chin rest raising and lowering button indicator lamp (the
indicator lamp ashes during “SLEEP MODE”) turn OFF. When you activate
any part of the instrument, it recovers from “SLEEP MODE”.
Setting
ON
: SLEEP MODE (Factory setting)
OFF : Normal mode
How to set
Press “
F
” or “
E
” of menu buttons to switch the setting while “SLEEP
MODE” is selected.
9.4.4 EXTERNAL ALIGNMENT : NORMAL
In normal mode, you can set whether or not the display automatically switches
back to anterior segment observation after photography.
Setting
AUTO : Th
e display automatically switches back to anterior
segment.
MANUAL : The display does not
automatically switch back to anterior
segment.
How to set
Press “
F
” or “
E
” button to switch the setting while “EXTERNAL
ALIGNMENT : NORMAL” is selected. Select “END” and press menu
button while the setting of your choice is highlighted to select the
setting and return to menu item selection.