Filter
Top Products
184
Appendix 4: Troubleshooting (continued)
Problem Solution Page
Problem Solution Page
Something other than lines displayed in the
control panel? Cannot operate the camera?
Did you put the camera in playback mode by
pressing the monitor button twice?
Is the mode dial set for playback , print
reserve mode , or setup/connection mode
?
Did you press the monitor button ?
See “Cannot operate the camera, monitor and
control panel blank.”
In the playback mode, the played back image
is displayed for viewing. Press the monitor
button to restore the camera to the
shooting mode.
Set the mode dial to P, A, S, or M.
Press the monitor button to switch on
the monitor.
Something other than lines displayed in the
control panel? Cannot operate the camera?
Mode dial set to playback ? Or with
mode dial set to P, A, S, or M, did you
rapidly press the monitor button twice?
“NO PICTURE” is displayed in the monitor?
“NO CARD” is displayed in the monitor?
See “Cannot operate the camera, monitor and
control panel blank.”
Set the mode dial to playback , or after
setting the mode dial to P, A, S, or M rapidly
press the monitor button twice.
There are no pictures stored on the card.
Make sure that a card that contains images
is inserted, or take a picture.
No card is installed in the camera. Insert a
card.
➞ 37
➞ 70
➞ 46
➞ 182
➞ 30
➞ 189
➞ 46
➞ 182
The monitor and viewfinder displays are different.
Cannot play back images on the monitor.