Filter
Top Products
45
2
Flash working range
ISO Max. WIDE (WIDE Limit) Max. TELE (TELE Limit)
AUTO 0.6 (2 ft.)~8.9 m (29.4 ft.) 0.5 (1.7 ft.)~7.4 m (24.4 ft.)
80 0.6 (2 ft.)~6.3 m (20.8 ft.) 0.5 (1.7 ft.)~5.2 m (17.2 ft.)
160 0.9*
1
(3 ft.)~8.9 m (29.4 ft.) 0.7*
2
(2.3 ft.)~7.4 m (24.4 ft.)
320 1.3*
1
(4.3 ft.)~12.5 m (41.3 ft.) 1.0*
2
(3.3 ft.)~10.4 m (34.3 ft.)
*
1
Range starts at 0.6 m (2 ft.) if you set the camera to the A (Aperture Priority) mode and stop the
aperture size down to 6.3 or higher.
*
2
Range starts at 0.5 m (1.7 ft.) if you set the camera to the A (Aperture Priority) mode and stop
the aperture size down to 6.3 or higher.
If you attempt to use the flash closer than the ranges described above, the entire picture may be too
bright, or shadows may appear in parts of the picture. If you attempt to use the flash farther than the
ranges described above, the light from the flash will not reach the subject and the subject will
appear dark. You may be able to take a picture farther than these ranges by increasing the ISO
value, but raising the ISO value could cause the picture to appear grainy. With ISO set for AUTO, the
ISO value will be adjusted automatically within the range of 80~160. (➞ 83)
Caution
• Please do not use the lens hood or conversion lenses when shooting with the internal flash. These
attachments will block some of the flashed light, resulting in a problem known as vignetting (loss or
darkening of the corner areas of the image). The ranges in the table above assume that no such
attachments are on the camera.
For more details about how to use the flash. (➞ 85)