Filter
Top Products
Operating Instructions
117
9. After you confirm the settings and click [Next>], set E-mail notification and
click [Next>].
• If you select [Enable], the E-mail Notification When Triggered page is
displayed. Enter the settings referring to page 115—116.
10. Click [Save] after confirming the settings.
• The new settings are saved.
• When finished, "Success!" is displayed.
11. Click [Go to Trigger page].
• The Trigger page is displayed.
Note
• If you set a short interval when transferring images to a cell phone, many E-
mails will be sent, which may lead to a large phone bill. Therefore, we
recommend you to set a long interval. 1 image per second frequency is
recommended.
• Alarm transfer stops operating until after the camera finishes all transfers. For
example, if the camera transfers 3 images per minute and 6 images in total,
alarm detection will follow the pattern below.
Setting Description
Disable • The camera does not send an E-mail notification when
buffering or transferring images.
Enable • The camera sends an E-mail notification (up to 3
destinations) when buffering or transferring images.