Filter
Top Products
Operating Instructions
137
4.8 Setting Alarm Log Notification
An alarm log sent once a day at a specified time can be checked. To enable Alarm
Log, set Alarm 1, Alarm 2 or Motion Detection for Trigger Setting and check
[Enable].
1. Click [Alarm Log] on the Setup page.
• When selecting Alarm1, Alarm2 or Motion Detection in Trigger page, the
Alarm log window is displayed.
2. Set each parameter.
3. Click [Save].
• Clicking [Cancel] cancels your settings without saving changes.
4. Click [Go to Alarm Log page].